How to Water Your Garden

Many people assume that planting seeds are the most important part of gardening, but proper watering is a crucial element. Keeping your plants hydrated may not seem like a big hurdle in May, but without a good plan in place, you’ll be very frustrated by mid-July. It turns out, there are a few different ways you can effectively keep your garden watered. Let’s summarize 3 basic methods for watering and analyze the pros and cons for each.

Overhead Sprinkler

Probably the simplest and most straight forward way to water a garden is to strategically set up an overhead sprinkler. Of course, there are different styles of sprinklers that can provide water to a large garden area. Two advantages of using an overhead sprinkler system are the ease of installation and low cost. Another advantage for this method is the ease with which you can measure the amount of water being applied to your garden. You can see the water hitting your garden then place bowls or buckets throughout to catch and measure the amount emitted.

There are some disadvantages and cautions to keep in mind when using overhead sprinklers. First, with most overhead sprinklers it is estimated that only about 30% percent of water coming from the sprinkler is utilized by the plant due in part to evaporation. Also, along with providing water to your plants you are also refreshing the weeds that share the garden space allowing those to thrive as well. You will find that you have bigger, happier weeds alongside your plants. Finally, overhead watering provides water to the plant leaves which, especially if wet through the night, encourage mold and fungal disease.

Drip System

Another popular way to water a garden is to utilize the drip system. A drip system was invented to combat all the dangers of overhead watering by applying water directly to the base of the plants. A visit to your local hardware store will reveal the various types of tubing and attachments available to create a drip system. One type of tubing comes with holes 12-18 inches apart so that when attached to your hose and laid in rows, the water runs onto the plant’s base. Drip irrigation provides water near the base of the plant, leaving the upper foliage dry and less susceptible to fungi.

You can also utilize a type of thick black tubing that does not have pre-made holes. With this you purchase smaller “feeder tubes” then puncture them through the main tube. You can customize exactly which plants will receive water by placing the emitter tube at the base of the plant. This works especially well in flower beds or with the bigger plants in your garden such as tomato plants. Drip systems are great for weed prevention by watering the plant and not the entire garden area. They use less water because less is obstructed by leaves and lost to evaporation and/or wind.

As a disadvantage, installing a drip system can be costly, especially if you have a large garden area. It can also be labor intensive at the start to purchase and install. Incorporating a drip system into your sprinkler timing zones adds another level of labor and requires some expertise. Also, a drip system will require that you dismantle and store the parts in your garage every Autumn. You will also need to keep an eye on your system to be sure the tubes remain unclogged and the parts in good working order, then replace or maintain parts as necessary. Because the holes that emit water in the tubing are small they can become clogged from sediments in the water. Installing a filter at the water’s outlet source or hose bib can help.

Soaker Hose

Finally, another watering method that replicates the drip system is the use of a soaker hose. A soaker hose attaches to your main hose and when the water is turned on it literally seeps out of the hose wetting the area around it. Like the drip tubes, a soaker hose is applied to the base of plants so its roots receive needed moisture and the leaves stay dry. It can also wrap around an area making it useful for a crop of small shoots like carrots.

A soaker hose will apply more water between plats than the drip tube so you may find a trail of weeds there. Soaker hoses are generally less expensive than drip tubes but because of their woven fabric and depending on your water type, soaker hoses don’t last through multiple seasons. This means you’ll have to expect the regular purchase of replacements.

You may find that you use more than one method for your garden area depending on each plant. Or, you may enjoy the ease of staying with one method. The task of developing an ideal system for watering that fits your needs and matches your time and budget will be a process. Don’t be afraid to explore different methods, get out there and enjoy what you create!

I want a fruit...& maybe a nut tree - Now What?

 Selecting fruit trees to grow in your yard or orchard depends on several factors:  available space, height and width restrictions, soil type, exposure to good light and air circulation, preferred type of fruit, type of root-stock, and much more. 

The first step is to plan. 

·         The following factors should be considered as you plan: 

• Climate zone
• Soil type and pH
• Location and surrounding landscaping
• 
  Drainage
• Overhead restrictions (power lines, other trees, shading)
• Width restrictions (fences, buildings property lines)
• Underground restrictions (sewer/power/telephone lines, septic tanks or drain fields, layers of poor soil, wells)
• Irrigation and fertilizing
• Time needed for tree care
• Pruning
• Harvesting
• Spraying

Selection of the trees is one of the most important steps. 

There are several great resources to help you select a tree for your yard.

The Pacific Northwest Handbooks publication EC 819, Growing Tree Fruits and Nuts in the Home Orchard  The Treasure Valley is Area II in this publication.

Other factors to consider are: 

•          Choose a reliable nursery with appropriate stock selected for this area
•          Choice of fruit
•          Varieties of chosen fruit that grow best in this region 
•          Dwarf or semi-dwarf root stock
•          Bare root, ball and burlap (B&B), or containerized stock
•         Need of a pollinator or self-pollinator,
•          Blooming and harvest times
•          Pests – insects, birds, or disease resistant

To maintain a strong tree or orchard, time must be given towards tree health.   There are numerous publications from Extension Services through the University of Idaho, Washington State University, and Oregon State University to assist you with your specific trees.

https://youtu.be/_YqQPtsC-eA

The following are important items to consider toward maintaining a vigorous home fruit tree:

•          Training of tree branches
•         Thinning and pruning
•          Irrigation needs
•          Fertilization needs
•          Insect and disease control
•          Weed 
•          Rodent control

A backyard fruit tree or orchard is a wonderful addition to your landscaping.  Be sure to choose trees that are compatible to your region, soil, and property.  With the proper selection, you can enjoy fruit from your backyard trees for many years to come.                                 

How to Water Your Garden

Signs of spring are all around and the patch of dirt you put to bed last fall is ready to plant! Many people assume that planting seeds are the most important part of gardening, but proper watering is a crucial element. Keeping your plants hydrated may not seem like a big hurdle in May, but without a good plan in place, you’ll be very frustrated by mid-July. It turns out, there are a few different ways you can effectively keep your garden watered. Let’s summarize 3 basic methods for watering and analyze the pros and cons for each.

Overhead Sprinkler

Probably the simplest and most straight forward way to water a garden is to strategically set up an overhead sprinkler. Of course, there are different styles of sprinklers that can provide water to a large garden area. Two advantages of using an overhead sprinkler system are the ease of installation and low cost. Another advantage for this method is the ease with which you can measure the amount of water being applied to your garden. You can see the water hitting your garden then place bowls or buckets throughout to catch and measure the amount emitted.

There are some disadvantages and cautions to keep in mind when using overhead sprinklers. First, with most overhead sprinklers it is estimated that only about 30% percent of water coming from the sprinkler is utilized by the plant due in part to evaporation. Also, along with providing water to your plants you are also refreshing the weeds that share the garden space allowing those to thrive as well. You will find that you have bigger, happier weeds alongside your plants. Finally, overhead watering provides water to the plant leaves which, especially if wet through the night, encourage mold and fungal disease.

Drip System

Another popular way to water a garden is to utilize the drip system. A drip system was invented to combat all the dangers of overhead watering by applying water directly to the base of the plants. A visit to your local hardware store will reveal the various types of tubing and attachments available to create a drip system. One type of tubing comes with holes 12-18 inches apart so that when attached to your hose and laid in rows, the water runs onto the plant’s base. Drip irrigation provides water near the base of the plant, leaving the upper foliage dry and less susceptible to fungi.

You can also utilize a type of thick black tubing that does not have pre-made holes. With this you purchase smaller “feeder tubes” then puncture them through the main tube. You can customize exactly which plants will receive water by placing the emitter tube at the base of the plant. This works especially well in flower beds or with the bigger plants in your garden such as tomato plants. Drip systems are great for weed prevention by watering the plant and not the entire garden area. They use less water because less is obstructed by leaves and lost to evaporation and/or wind.

As a disadvantage, installing a drip system can be costly, especially if you have a large

garden area. It can also be labor intensive at the start to purchase and install. Incorporating a drip system into your sprinkler timing zones adds another level of labor and requires some expertise. Also, a drip system will require that you dismantle and store the parts in your garage every Autumn. You will also need to keep an eye on your system to be sure the tubes remain unclogged and the parts in good working order, then replace or maintain parts as necessary. Because the holes that emit water in the tubing are small they can become clogged from sediments in the water. Installing a filter at the water’s outlet source or hose bib can help.

Soaker Hose

Finally, another watering method that replicates the drip system is the use of a soaker hose. A soaker hose attaches to your main hose and when the water is turned on it literally seeps out of the hose wetting the area around it. Like the drip tubes, a soaker hose is applied to the base of plants so its roots receive needed moisture and the leaves stay dry. It can also wrap around an area making it useful for a crop of small shoots like carrots.

A soaker hose will apply more water between plats than the drip tube so you may find a trail of weeds there. Soaker hoses are generally less expensive than drip tubes but because of their woven fabric and depending on your water type, soaker hoses don’t last through multiple seasons. This means you’ll have to expect the regular purchase of replacements.

You may find that you use more than one method for your garden area depending on each plant. Or, you may enjoy the ease of staying with one method. 

The task of developing an ideal system for watering that fits your needs and matches your time and budget will be a process. Don’t be afraid to explore different methods, get out there and enjoy what you create!

I WANT A FRUIT TREE. NOW WHAT?

Selecting fruit trees to grow in your yard or orchard depends on several factors:  available space, height and width restrictions, soil type, exposure to good light and air circulation, preferred type of fruit, type of root-stock, and much more. 

The first step is to plan. 

·         The following factors should be considered as you plan: 

• Climate zone,
• Soil type and pH,
• Location and surrounding landscaping,
  
• Drainage,
• Overhead restrictions (power lines, other trees, shading),
• Width restrictions (fences, buildings, property lines),
• Underground restrictions (sewer/power/telephone lines, septic tanks or drain fields, layers of poor soil, wells),
• Irrigation and fertilizing,
• Time needed for tree care,
• Pruning,
• Harvesting,
• Spraying.

Selection of the trees is one of the most important steps. 

There are several great resources to help you select a tree for your yard.
The Pacific Northwest Handbooks publication EC 819, Growing Tree Fruits and Nuts in the Home Orchard
The Treasure Valley is Area II in this publication.

Other factors to consider are: 

•          Choose a reliable nursery with appropriate stock selected for this area,
•          Choice of fruit,
•          Varieties of chosen fruit that grow best in this region, 
•          Dwarf or semi-dwarf root stock,
•          Bare root, ball and burlap (B&B), or containerized stock,
•         Need of a pollinator or self-pollinator,
•          Blooming and harvest times,
•          Pests – insects, birds, or disease resistant.

To maintain a strong tree or orchard, time must be given towards tree health.   There are numerous publications from Extension Services through the University of Idaho, Washington State University, and Oregon State University to assist you with your specific trees.

https://youtu.be/_YqQPtsC-eA

The following are important items to consider toward maintaining a vigorous home fruit tree:

•          Training of tree branches,
•         Thinning and pruning,
•          Irrigation needs,
•          Fertilization needs,
•          Insect and disease control,
•          Weed 
•          Rodent control.

Click for more fruit tree information 

This helpful publication below is specific to the Treasure Valley. It can be obtained free of charge from the University of Idaho Extension Services offices in Canyon County (208) 459-6003.

In summary, a backyard fruit tree or orchard is a wonderful addition to your landscaping.  Be sure to choose trees that are compatible to your region, soil, and property.  With the proper selection, you can enjoy fruit from your backyard trees for many years to come.

                       

                       

Watering your Garden

With signs of Spring all around, you look out at the patch of dirt you put to bed last Fall and feel excited at the prospect of what you might plant there.

Then one beautiful, warm day you plant seeds and starts then stand back and admire your work. You are soon discover your work has only begun. The primary hurdle in keeping your garden alive will be to provide adequate amounts of water throughout the dry, arid Southwest Idaho Summer.

Keeping your plants wet may not seem like a big hurdle in May but, trust me, if you do not have a good plan in place you’ll be very frustrated by mid-July.

It turns out, there are a few different ways you can effectively keep your garden watered. Let’s summarize 3 basic methods for watering and analyze pros and cons for each method.

Overhead Sprinkler

Probably the simplest and most straight forward way to water a garden is to strategically set up an overhead sprinkler. Of course, there are different styles of sprinklers many with a moving head that can provide water to a large garden area. Two advantages of using an overhead sprinkler system are of course ease of installation and low cost.

Another advantage for this method is the ease with which you can measure the amount of water being applied to your garden. You can see the water hitting your garden then place bowls or buckets throughout to catch and measure the amount emitted.

There are some disadvantages and cautions to keep in mind when using overhead sprinklers. First, with most overhead sprinklers it is estimated that only about 30% percent of water coming from the sprinkler is utilized by the plant due in part to evaporation.

Also, along with providing water to your plants you are also refreshing the weeds that share the garden space allowing those to thrive as well. You will find that you have bigger, happier weeds alongside your plants.

Finally, overhead watering provides water to the plant leaves which, especially if wet through the night, encourage mold and fungal disease.

Drip System

Another popular way to water a garden is to utilize the drip system. A drip system was invented to combat all the dangers of overhead watering by applying water directly to the base of the plants.

A visit to your local hardware store will reveal the various types of tubing and attachments available to apply a drip system. One type of tubing comes with holes 12-18 inches apart so that when attached to your hose and laid in rows the water runs onto the plant’s base.

Drip irrigation provides water near the base of the plant, leaving the upper foliage dry and less susceptible to fungi.

You can also utilize a type of thick black tubing that does not have pre-made holes. With this you purchase smaller “feeder tubes” then puncture them through that main tube. You can customize exactly which plants you’d like to receive the water by placing the emitter tube at the base of the plant. This works especially well in flower beds or with the bigger plants in your garden such as tomato plants.


Drip systems are great for weed prevention by watering the plant and not the entire garden area. They use less water because less is obstructed by leaves and lost to evaporation and/or wind.

As a disadvantage, installing a drip system can be costly, especially if you have a large garden area. It can also be labor intensive at the start to purchase and install. Incorporating a drip system into your sprinkler timing zones adds another level of labor and requires some expertise. Yet this can sure save precious time and allows you to go on vacation without worrying about your garden.

Also, a drip system will require that you dismantle and store the parts in your garage every Autumn. You will also need to keep an eye on your system to be sure the tubes remain unclogged and the parts in good working order, then replace or maintain parts as necessary. Because the holes that emit water in the tubing are small they can become clogged from sediments in the water. Installing a filter at the water’s outlet source or hose bib.

Soaker Hose

Finally, another watering method that replicates the drip is the use of a soaker hose. A soaker hose attaches to your main hose and when the water is turned on it literally seeps out of the hose wetting the area around it. Like the drip tubes, a soaker hose is applied to the base of plants so its roots receive needed moisture and the leaves stay dry. It can also wrap around an area making it useful for a crop of small shoots like carrots.

A soaker hose will apply more water between plats than the drip tube so you may find a trail of weeds there.

Soaker hoses are generally less expensive than drip tubes but because of their woven fabric and depending on your water type, soaker hoses don’t last through multiple seasons. This means you’ll have to expect the regular purchase of replacements.

You may find that you use more than one method for your garden area depending on each plant. Or, you may enjoy the ease of staying with one method.

The task of developing an ideal system for watering that fits your needs and matches your time and budget will be a process. Don’t be afraid to explore different methods, get out there and enjoy what you create!